Aquaton-10 brand A-30 - how to use

Aquaton-10 brand A-30 is an effective concentrated disinfectant used in water treatment, sanitization of containers, tanks and equipment. It has a strong bactericidal, fungicidal and virucidal effect.

How to use

1. Preparation of working solution

• Dilute the concentrate in a ratio of 1:30 (1 part Aquaton-10 to 30 parts water).
• Example: to obtain 5 liters of working solution, add 9 ml of Aquaton-10 to 5 liters of water and mix thoroughly.

2. Disinfection of containers and tanks

• Fill the washed container with 50–100 ml of working solution, depending on the volume.
• Close the lid tightly and shake vigorously for 30-40 seconds, washing all the inner walls and the lid.
• For large volumes, use the method of irrigating the entire internal surface with the solution.
• The remaining solution can be reused, pour it into a separate clean container.

3. Disinfection of drinking water

• Pour water into a 5-6 liter container.
• Add 3 ml of Aquaton-10 and stir.
• Leave for 1 hour to take effect.
• After disinfection, it is advisable to filter the water (through a sand filter, cartridge, cloth or gauze).

Precautionary measures

• Aquaton-10 is classified as a low-hazard substance (hazard class 4).
• Avoid contact with eyes and mucous membranes. In case of contact, rinse with water.
• Wash your hands thoroughly after work.
• Do not drink, smoke or eat while working with the solution.

Best before date

• The concentrate is stored for up to 12 months.
• The working solution retains its properties for up to 3 months when stored in a sealed container.