Peltier plate for water cooler with electronic cooling.
Universal plate that fits all models of water coolers with electronic cooling system in a bundle fan-radiator-plate. This plate is attached with one side to the cold water tank using thermal paste, and the other side to the radiator, also need to be lubricated with thermal paste. And it turns out, on the side where it fits to the tank - it cools down, on the other side that fits to the radiator - it heats up. The radiator takes the heat, and the fan blows it out.

You can connect the Peltier plate either with a connector to the electronic cooling board, or cut the wires on the new and old and connect the red wire to the red, black to the black. The plates are considered delicate, so you can't tighten them too much with bolts, the radiator itself is already at the very end when you screw it onto the plate.

Specifications:

Chip Type: ZXS TEC1-12706

External dimensions: 40*40*3.75mm

Internal resistance: 2.1~2.4 (ambient temperature 23±1'C, 1KHz Ac test) Maximum temperature difference: Tmax (Qc=0) above 59'C. Working current: Imax=4.3-4.6A (rated at 12V) Nominal voltage: 12V (Vmax: 15V starting current 5.8A) Cooling power: Qcmax 55W Working environment: temperature range -55'C~83'C (high ambient temperature drop directly affects the cooling performance).

Manufacturer: China

Factory: Midea

Description:

Get cooling in minutes or heating to boiling, simply reverse the polarity, used for many devices and situations from CPU coolers to power supply alternatives, or even your own.

Custom car: for drinks heater / cooler. Since they mainly have a semiconductor material sandwiched between ceramic plates and have no moving parts. These devices must be used in conjunction with a heat sink to avoid burning. Each device is fully checked and tested. Equipped with 6-inch insulated wires.

To speed up the selection of plates for your cooler model, take the steps:

1) PHOTO of your spare part and cooler.

2) Send all the information to us on Viber / Telegram: 0988184117

How to change the cooler plates video we have on the YouTube channel .

We have a wide range of plates and other spare parts for all coolers: for EcoTronic, Vio, HotFrost, Lanbao, Clover, Aquaworld, Cooper Hunter, Crystal, Family, Penoso, Ryder, Clover, AquaWork, Quinian, Vivat, Vio, Quidi, Angel, Elite, Yujin, AEL AquaWorld, Clover, Cooper&Hunter, Ecotronic, Family, HotFrost, Lanbao, Penoso, Qidi, Qinyuan, AquaWork, Angel, Elite, Zeus, Crystal, Vivat, Rauder, Yujin, Vio, AEL, Aquart, Ryo, Vatten, Ningbo, YLR, Smixx, BioRay, Ecocenter, Lesoto, ALP

We send spare parts across Ukraine by Nova Poshta with full prepayment!