Electric/battery-powered water pump with adapter for 5-6-10L ViO E7 Plus bottles

Compatible with all bottles: polycarbonate, polyethylene, from 8L. 11L. 13L. 15L. 19-20L. Using this pump with 3L-5L-6L-10L bottles (store-bought) is possible, since we include an additional adapter in the kit, which you will have in the box.

A battery-powered water pump that is used to dispense water from bottles of different sizes. In order to pump a glass of water, you need to press the button, and then again to stop the water. Quickly pumps water with one touch of the button on the top of the body. Often this pump may not have a brand and model inscription, but just the name on the box: automatic water dispenser. The electric pump has a USB cable for recharging. You can charge it from a phone, laptop or from a 220 W network via an adapter (not included). The ViO E7 pump is also equipped with a charge indicator light.

To fully charge the pump, it takes 3–4 hours. One charge is enough for up to 80L, about 4 bottles. The battery capacity is small — 1200mAh. The flow rate is average, about 50 seconds per 1 liter of water. The noise level of the pump is average — around 65dB, provided the pump is working with water, not running dry (as the motor is louder when operating without water). The silicone tube is made from non-toxic safe material. The spout is made of stainless steel. Both the tube and spout are removable, which is convenient for use and periodic cleaning. The pump can be used either while plugged into a socket (from a 220V network) with the power cable or from the built-in battery, which should be recharged periodically.

Package contents:

Pump in box
Silicone hose + spout
microUSB charging cable
Plastic adapter for 5–6L bottles
Power plug adapters are not included!

Before first use, you must:

Charge the pump for 3–4 hours;
Rinse the silicone tube in warm water;
Attach the tube and spout to the pump;
Install the electric pump on the bottle without removing the cap;
Install the electric pump on a 5–6L bottle by screwing the adapter onto the neck;
Do not turn on the pump if there is no water in the bottle.

To be able to install the electric pump on 5–6 liter bottles — we recommend purchasing an adapter for the electric pump.

Maintenance recommendations:

Regular cleaning and disinfection every 3–6 months.
Wash and sanitize your hands before installing and assembling the pump.
Before first use, drain a few glasses of water to rinse internal components.

Operating recommendations:

Assemble and disassemble the pump very carefully.
Use clean bottled water, preferably reverse osmosis (filtered).
Do not touch the spout with glasses or other objects while pouring.