Electric water pump Clover E10 - Double motor-double speed. Adapter for eggplants 5-6 l in the set. + Adapter for a 13-19 liter bottle. Large battery. Leak protection. Button illumination.

It is distinguished by increased power, it has a built-in double motor, due to which the pump pumps water faster than similar models of electric pumps. One recharge of the pump is enough to pump 6-8 bottles of 19 liters of water, after which it needs to be recharged again for 5-6 hours.

Compatible with all bottles: polycarbonate, polyethylene, glass with volume 8L, 11L, 13L, 15L, 19–20L.
This pump can also be used with store-bought bottles (3L–5L–6L–10L), as it comes with an additional adapter included in the box.
We also include an extra adapter for 19L bottles in the package.

To fully charge the pump, it takes 4–5 hours. One full charge can pump up to 160L (about 6–8 bottles).
The battery capacity is large — 2000mAh. Flow rate is fast — about 26 seconds per 1 liter.
Noise level is average — around 55dB when used with water (motor is louder if running dry).
The silicone tube is made from safe, non-toxic material. The spout is made of stainless steel.
The tube and spout are detachable, making them easy to clean and maintain.
You can use the pump while plugged into an outlet (220V) or via the built-in battery (which needs periodic recharging).
One of the advantages of this model is leak protection.
A silicone seal is built into the pump base at the metal spout’s entry point.
This prevents dripping or leakage between the spout and pump — a common issue with budget battery-powered models.

Set includes:

• Pump in box

• Silicone hose + spout

• microUSB charging cable

• Adapter for bottles 5–6–10L

• Adapter for bottles 13L and 19L

• Power plug adapter not included!

Key features of the Clover E10 electric pump:

• Made from durable, food-safe materials: silicone, food-grade plastic, 304 stainless steel

• Comes with USB charging cable (no adapter included)

• Stylish and modern design

• Dual motors for double power

• Built-in LED light when in use

First-time usage tips:

• Rinse silicone tube in warm water

• Drain one glass of water after first setup

• First charge must be at least 5 hours

• Use for drinking water only

Maintenance recommendations:

• Clean and disinfect every 3–6 months

• Wash hands and sanitize before assembling the pump

• Drain a few glasses before first use to clean inner parts

Usage tips:

• Assemble/disassemble carefully

• Use only clean bottled water, preferably filtered (reverse osmosis)

• Avoid touching the spout with glasses or any other objects

Specifications (table):