Water pump on a battery 1500mah ViO E2
A practical and quite economical device for dispensing water at room temperature from 18.9-liter bottles. The pump is a single piece that does not need to be assembled. Before using the electric ViO E2 pump for the first time, you just need to charge it (it takes 3-4 hours to fully charge). It is powered by a lithium battery, 1500mah, which is charged from a 220 V network. Water is supplied by a submersible screw pump. The device is put on the bottle (you must first remove the plastic cap of the bottle), and is firmly fixed with a clamping nut. Water is poured from the bottle by pressing a button.

It is easy to install and securely fastens onto the bottle neck using a special clamp nut. Water dispensing from the bottle is activated by pressing the button, and to stop the dispensing — press it again.
Compatible with all 19–20L bottles. The battery is enough to pump water from up to 6 bottles of 19L. Or you can use the pump while connected to a 220V power outlet. The flow rate is about 9 seconds per 1 liter of water. The pump is loud due to a powerful motor — around 70dB, provided the pump works with water and not dry (as the motor gets louder in idle mode). The tube is made of non-toxic, safe material. Both the tube and the spout are detachable.

The ViO E2 electric water pump is available for purchase from us at the best price with delivery across Ukraine and additional gifts such as bottled water, a cleaning certificate, and an additional 1-month warranty from our store Cooler-Water.

Maintenance recommendations:
Regularly clean and disinfect every 3–6 months.
Before installing and assembling the pump, wash and sanitize your hands.
Before first use, drain several glasses of water to rinse internal parts.

Operating recommendations:
Assemble and disassemble the pump very carefully.
Use clean bottled water, preferably reverse osmosis (filtered).
Do not touch the spout with glasses or other materials when drawing water.